DC11Cr ELECTRODE FOR CUTTING BLADES BUILD UP
DESCRIPTIONS
For cutting blades build up onto all type of steel mold, no burr defect problems (Part BARI).
MECHANICAL PROPERTIES
Hardness at 1st layer as welded : 52 ~ 55 HRC
Hardness after machine work : 55 ~ 57 HRC
Molten metal becomes Martensite structure, hard suddenly as welded, no blowhole, easy to machine work, and after machined work hardness still increase.
APPLICATIONS
All type of steel mold such as TGC-600, SFH 5, HMD, SX-105V, ICD 5, OKS 5, GO 5, GM 190/190M, KY 870, HK-600A/600B, SKD 11, WST 2336, HK-700, SKS-3, SG2, W 2601, TD 2, AUD 11, SLD, DC 53, DCMX, DC 11, FC-250, FC-300, GM 238M, FCD-500/600, FCD 550/550M, FCD-700, KSCD 80015 (FCDFH), GM 240M, CH-891, GM 241, NKM 240, HD-700, GGG-70L, TGC-600
CURRENT APPLICATIONS
DC-/AC(Uo : 60V
Diameter X Length (MM) Current Range (A)
2.5 x 350 45 ~ 65
3.2 x 350 70 ~ 90
4.0 x 350 100 ~ 120
CHARECTERISTICS
● Usable onto cast iron mold directly, no need for underlay.
● Usable onto tool steel and flame hardening steel mold.
● Easy to weld, beautiful weld deposit, and alternative hardness level.
● No burr defect problems (part BARI).
